Husqvarna FS 500 E Manual De Usuario página 48

ON/OFF switch
The ON/OFF switch is used to start and stop the motor.
To do a check of the ON/OFF switch
Note: If the product does not start, refer to
does not start on page 59 .
1. Connect the power plug of the product into the mains
outlet.
2. Turn the machine stop button clockwise to make
sure that machine stop button is disengaged.
3. Turn the ON/OFF switch to 1 to start the product.
4. Wait for 5 seconds to let the product operate at the
correct speed.
48
5. Turn the ON/OFF switch to 0 and make sure that the
motor stops.
Machine stop button
The machine stop button quickly stops the motor and all
electrical functions.
The product
Note: Do not use the machine stop button to stop the
product unless there is an emergency. For correct
procedure how to stop the product during operation,
refer to
To do a check of the machine stop button
1. Push the machine stop button (A) and make sure
that the motor stops.
2. Turn the machine stop button clockwise (B) to
disengage.
To stop the product on page 54 .
B
A
1024 - 002 - 18.06.2019