Vermeiren Luna Manual De Instrucciones página 19

3.3.4 Transformer connections
L
CAUTION:
Risk of injury - Do not touch the plug with wet hands.
L
CAUTION:
Risk of injury - Do not place any objects on the connection and the
lead, and protect these against mechanical loads.
1. A 220 V / 230 V, 50 Hz power socket conforming to the VDE specifications is required
2. The diagram for the transformer connections is given in the figure below:
Take hold of the plug only to remove it from the power socket.
The power lead must be laid without any loops or kinks and should not pass around sharp
edges.
The power cable leading to the manual switch must be protected against squashing.
6
1 2
1 2
3 4
3 4
5
Page 17
1 = Connection of headrest motor
2 = Connection of knee-bending angle motor
3 = Connection of head-end motor
4 = Connection of feet-end motor
5 = Connection of disabling box
6 = Transformer / control box
The cables of the motors and connections of the
transformers bear the same numbers.
EN
Luna
2010-11