Connect A Power Source; Usb Charging Function - Husqvarna PG 820 RC Manual De Instrucciones

Connect a power source

• Connect the machine to a 3 phase power supply.
• The power cable must suspended to avoid stress
while the machine is working.
When a concrete dust vacuum is connected to the
grinder, it must be connected to a 3-phase power source.

USB charging function

• Charging from the USB is only possible when the
grinder is connected to a 3-phase power and turned
on.
• USB charging will continue independently of machine
stalling, or emergency stop being activated, when
connected to a 3-phase power.
• There is no limit to the charging time allowed, however
if your device reaches full charge then it is good
practice to remove it from the USB port.
• The USB port will provide a maximum output of 10W.
ASSEMBLING AND ADJUSTMENTS
–
English 13