Bluetooth Telephone - Pioneer DEH-X8700BH Manual De Instrucciones

TIP
The Bluetooth connection can also be made by detecting the unit from the Bluetooth device. To do so,
[Visibility] in the connection menu needs to be set to [ON]. For details on Bluetooth device operations,
refer to the operating instructions supplied with the Bluetooth device.
Connection menu
Menu Item Description
Device list Display the list of paired Bluetooth devices. [Connected] is
displayed when the Bluetooth connection is established.
Delete device Delete the device information.
[Delete YES]
Add device Register a new device.
Auto connect Select [ON] to connect to a Bluetooth device automatically.
[ON], [OFF]
Visibility Select [ON] so that a Bluetooth device can detect the unit when
the unit is connected via Bluetooth to another device.
[ON], [OFF]
Pin code input Change the PIN code.
1 Press the M.C. dial to display the setting mode.
2 Turn the M.C. dial to select a number.
3 Press the M.C. dial to move the cursor to the next position.
4 After inputting the PIN code, press and hold the M.C. dial.
After inputting the PIN code, pressing the M.C. dial returns you
to the PIN code input display, and you can change the PIN code.
Device INFO Switch the device information on the display between the
device name and Bluetooth device address.
Guest Mode Select [ON] to move to the [Delete device] screen automatically
when the unit has already been paired with three devices.
[ON], [OFF]
Auto pairing Select [ON] to pair the unit and iPhone automatically when an
iPhone is connected to the unit via USB. (This function may not
[ON], [OFF]
be available depending on the version of iOS you are using.)

Bluetooth telephone

First, make a Bluetooth connection with the Bluetooth telephone (page 10). Up to two
Bluetooth telephones can be connected simultaneously.
Important
• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running
can drain the vehicle's battery.
• Be sure to park your vehicle in a safe place and apply the parking brake before operation.
To make a phone call
1
Press to display the phone menu.
When two phones are connected, a phone name appears then a phone menu will be
displayed. To switch to another phone, press
2
Turn the M.C. dial to select [Missed calls], [Dialed calls], [Received calls] or
[PhoneBook], then press to confirm.
The phone number list appears.
3
Turn the M.C. dial to select a name or phone number, then press to confirm.
The phone call starts.
To answer an incoming call
1
Press when a call is received.
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call while one
phone is being used for a call, a message will appear in the display. To answer that incoming call, you
need to end the current call.
Basic operations
Purpose Operation
End a call Press
Reject an incoming call Press and hold
Switch between the current caller Press the M.C. dial.
and a caller on hold
Cancel a caller on hold Press and hold
Adjust the volume of the caller's Turn the M.C. dial during the call.
voice (When private mode is on,
this function is not available.)
Turn the privacy mode on or off Press BAND/
again.
.
when a call is received.
.
during the call.
En
11