Pioneer DEH-P7200HD Manual De Instrucciones página 32

Appendix
Additional Information
Message Cause
NO AUDIO No songs
The connected
USB storage de-
vice has security
enabled
SKIPPED The connected
USB storage de-
vice contains
WMA files em-
bedded with
Windows Med-
iaä DRM 9/10
PROTECT All the files in the
USB storage de-
vice are em-
bedded with
Windows Media
DRM 9/10
CHECK USB
The USB connec-
tor or USB cable
has short-
circuited.
The connected
USB storage de-
vice consumes
more than 500
mA (maximum
allowable cur-
rent).
NOT COMPA- Not compatible
TIBLE USB device
32
En
Action
Transfer the audio
files to the USB
storage device and
connect.
Follow the USB
storage device in-
structions to dis-
able the security.
Play an audio file
not embedded with
Windows Media
DRM 9/10.
Transfer audio files
not embedded with
Windows Media
DRM 9/10 to the
USB storage de-
vice and connect.
Check that the
USB connector or
USB cable is not
caught in some-
thing or damaged.
Disconnect the
USB storage de-
vice and do not
use it. Turn the
ignition switch to
OFF, then to ACC
or ON and then
connect only com-
pliant USB storage
devices.
Disconnect your
device and replace
it with a compati-
ble USB storage
device.
Message Cause
ERROR-19 Communication
failure
ERROR-23
USB storage de-
vice is not for-
matted with
FAT12, FAT16 or
FAT32
iPod
Message Cause
NO DEVICE When plug and
play is off, no
USB storage de-
vice or iPod is
connected.
FORMAT
There is some-
READ times a delay be-
tween the start of
playback and
when you start to
hear any sound
ERROR-19
Communication
failure
iPod failure
Action
Perform one of the
following opera-
tions.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage de-
vice.
–Change to a dif-
ferent source.
Then, return to the
USB source.
USB storage de-
vice should be for-
matted with FAT12,
FAT16 or FAT32.
Action
! Turn the plug
and play on.
! Connect a com-
patible iPod.
Wait until the mes-
sage disappears
and you hear
sound.
Disconnect the
cable from iPod.
Once iPod's main
menu is displayed,
reconnect cable.
Reset the iPod.
Disconnect the
cable from iPod.
Once iPod's main
menu is displayed,
reconnect cable.
Reset the iPod.