Sony GXD-L65H1 Manual De Instrucciones página 60

Parts
8 AC IN socket
9 SPEAKER socket
0 1 (POWER) switch
qa (RETURN) button
qs (ENTER) button
qd –/+ (volume/cursor) button Press to control speaker volume. When the menu is displayed, press to move the cursor or
qf MENU button
qg (INPUT) button
qh Temperature sensor
qj Speaker installation
positions
qk Stand installation holes
ql Eye-bolt
w; Eye-bolt fitting position
(for vertical installation)
wa Cable cover
ws Terminal cover
* The status when the sound is output and the input signal can be switched.
12
GB
Description
Connect the supplied AC power cord to this socket and to a wall outlet. See page 19.
Once you connect the AC power cord, the
display goes into the standby mode.
Connect the speakers SS-SPG02 (not supplied) to this socket. For more details on
connecting the speakers, see the instruction manual that came with the speakers. For
details on how to route the speaker cords, see page 21.
Switches the display on or off (standby).
This returns to the preceding menu screen.
Press to set your choice.
set a value.
Press to set your choice.
Press to show menus.
Press to select a signal to be input from the INPUT or OPTION connector.
The signal to be input switches as follows each time you press the INPUT button.
S Video Video
When an optional adaptor supporting the video signal is not installed in the OPTION slot,
OPTION will be skipped.
Detects the ambient temperature.
Attach the dedicated speakers SS-SPG02.
Screw holes conforming to VESA standard. (Pitch: 600mm × 400mm, Screw: M6)
This is used when installing the display with a crane.
After installation, the screws are undone and the eye-bolt removed.
When installing the display vertically, the eye-bolt is fitted in this position.
Request your dealer or Sony service center to fit the eye-bolt.
This cover prevents water and dust from entering the gap between the cables and terminal
cover.
When connecting cables, loosen the screws and remove the cable cover.
This cover prevents water and dust from entering the terminal area.
When connecting cables, loosen the screws and remove the terminal cover.
indicator lights up in red and the
HD15 DVI HDMI OPTION