Scan Revert; Scan Delete/Add - Kenwood NX-220 Manual De Instrucciones

SCAN REVERT

The Scan Revert channel is the channel selected when you
press the PTT switch to transmit during scan. Your dealer can
program one of the following types of Scan Revert channels:
• Selected: The last channel selected before scan.
• Selected + Talkback: Same as "Selected", plus you can
respond to calls on the channel at which scan is paused.
• Priority: The Priority channel.
• Priority + Talkback: Same as "Priority", plus you can
respond to calls on the channel at which scan is paused.
• Last Called + Selected: The last channel on which you
receive a call.

SCAN DELETE/ADD

You can add and remove zones and/or channels/group IDs to
and from your scan list.
1 Select your desired zone and/or channel/group ID.
2 Press the key programmed as [Zone Delete/Add] (to
add/remove zones) or [Scan Delete/Add] (to add/remove
channels/group IDs) (types I and II only).
• You can also press and hold the key programmed as [Scan
Delete/Add] to add/remove zones.
16