Fold Up The Wheelchair; Taking Off The Wheels; Transport In The Car - Vermeiren V200 XL Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 124

2.13 Fold up the wheelchair

CAUTION:
Chance of pinching – Do not place fingers between the components
   
of the wheelchair.
1.
Fold or remove the footplates (see § 2.5).
2.
Swing the push bar away from the right hand-grip (standing behind the wheelchair).
3.
Take the seat on the front side and backside and pull it up.

2.14 Taking off the wheels

To facilitate the transport off the wheelchair the rear wheels can be taken off:

2.15 Transport in the car

DANGER:
   
Risk of injury – The wheelchair is not suited for use as a seat in a
motor vehicle.
WARNING:
Risk of injury – See that the wheelchair is attached properly. So you
   
can avoid injury from the passengers during collision or sudden braking.
WARNING:
Risk of injury – Use for attaching the wheelchair and passenger
   
NEVER the same seatbelt.
Never use your wheelchair as a seat in an automobile or other vehicle. The wheelchair shall
be marked with following symbol.
To transport the wheelchair in the car use following steps:
1.
Remove footrests and accessories.
2.
Store footrests and accessories safely.
3.
If possible, fold the wheelchair and remove the wheels.
4.
Place the wheelchair in the luggage place.
5.
If the wheelchair and the passenger compartment is NOT separated, attach the
frame of the wheelchair securely to the vehicle. You can use the available safety
belts in the vehicle.
1.
Make sure the brakes standing in the off
position.
2.
Take the wheelchair to the side frame where
you want to remove the wheel.
3.
Press the button
hub.
4.
Pull the wheel away from the frame.
ƒ‰‡
V200 XL
in the center of the wheel
c
2012-02
Tabla de contenido
loading

Tabla de contenido