Safety Instructions - Festool FAKIR TP 220 Manual De Instrucciones Y Lista De Piezas De Repuesto

Original operating manual
1 Technical data .......................... 9
2 Symbols .................................. 9
3 Machine features ...................... 9
4 Intended use............................ 9
5

Safety instructions .................... 9

6 Working................................... 9
7 Service and maintenance ........... 10
7.1 Replacing the blade rollers ......... 10
8 Accessories .............................. 10
9 Warranty ................................. 10
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1 Technical data
FAKIR TP 220
Weight incl. protective
cover
Weight excl. protective
cover
Length
Max. perforation depth
2 Symbols
Warning of general danger
Manual, read the instructions
Wear protective gloves.
Wear protective goggles.
Caution! Risk of cutting!
3 Machine features
[1-1] Telescopic handle
[1-2] Clamp lever for adjusting the length
of the telescopic handle
[1-3] Perforation depth adjuster
[1-4] Blade roller
[1-5] Protective cover
4 Intended use
The device is designed to perforate wallpa-
per. The device makes holes and tears in
wallpaper so that water containing wallpaper
stripper can penetrate more efficiently. This
1.7 kg
1.5 kg
870 - 1370 mm
3 mm
function is only effective on wallpaper affixed
using water-soluble adhesive.
The user bears the responsibility for damage
and accidents caused by improper use.
5 Safety instructions
– Always attach the protective cover over
the rollers when the device is not in use.
Risk of injury!
– Ensure that persons standing near the ma-
chine are at a safe distance from the work
area.
– Wear protective goggles and protective
clothing.
– Do not touch the blade rollers. Risk of in-
jury!
– When using solvent, always observe the
safety instructions provided by the manu-
facturer.
– Make sure that the area where you are us-
ing the solvent is well ventilated.
6 Working
CAUTION
Loose wallpaper residue may fall into
your eyes!
Wear protective goggles.
Wear suitable protective clothing.
Removing and attaching the protective
cover [Fig. 3].
Adjust the length of the telescopic rod.
Open the clamp lever [2-1]!
Pull the telescopic rod to the desired
length.
Close the clamp lever [2-1]!
The telescopic rod can be adjusted to any
length. The retaining force of the clamp
lever can be adjusted using the screw
2] while the lever is closed.
Adjusting the perforation depth
Set to the required perforation depth us-
ing the rotary knob [4-1].
The plaster / sublayer may be damaged if
you adjust the perforation depth too high.
Start with the lowest setting and increase
the perforation depth if required. One turn
of the rotary knob corresponds to 1 mm.
GB
TP 220
[2-
9