Automatic Sound; Radio Mode; Adjusting The Tuner; Switching To Radio Mode - Blaupunkt Bahamas MP46 Instrucciones De Manejo

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 67
Volume

Automatic Sound

This function automatically adjusts the
volume of the car sound system to the
vehicle speed. For this purpose, the car
sound system must be connected as
described in the installation instructions.
You can adjust the automatic sound in 6
increments from (0 - 5).
Press the MENU button 9.
u
u
Press the
or
until "VOLUME MENU" appears on the
display.
button : to open the
u
Press the
menu.
u
Press the
or
ly until "AUTO SD" appears on the dis-
play.
u
Set the automatic sound 0 - 5 with the
or button :.
When you have fi nished making your
changes,
Press the MENU button 9 three
u
times.
Note:
Your optimal setting of 0 - 5 of the
speed-dependent sound adjustment
depends upon the driving noise deve-
lopment of your vehicle. Determine the
perfect value for your vehicle using trial
and error.
button : repeatedly
button : repeated-

Radio mode

Adjusting the tuner

To ensure proper functioning of the tuner,
the device must be set for the region in
which it is being operated. You can select
among Europe (EUROPE), America (USA),
South America (S-AMERICA), and Thailand
(THAI). The tuner is factory-set to the regi-
on in which it was sold. If you experience
problems with your radio reception, please
check this setting.
The radio functions described in these
operating instructions refer to the tuner
setting America (USA).
u
Switch off the device by pressing but-
ton 1.
u
Hold the 1 and 5 buttons ; pressed at
the same time and switch on the device
again with the button 1.
"TUNER" is displayed.
u
Select your tuner region with the
button :.
To save the setting,
u
Switch the device off and on again or
wait approx. 8 seconds. The radio starts
playing with the last setting selected
(Radio, CD, CD changer or AUX).

Switching to radio mode

If you are in CD, CD changer or AUX mode,
u
Press the BND•TS button 6.
or
Press the SOURCE button 4
u
repeatedly until the memory bank, e.g.
"FM1", appears on the display.
Radio mode
or
11
Tabla de contenido
loading

Tabla de contenido