Hama 00040074 Instrucciones De Uso página 7

6. Special Functions
6.1 Punch Through Channel
The Punch Through Channel allows the Ch+ or Ch- commands to bypass the
currently controlled device and switch the channels on a second device.All other
commands remain unin uenced.
6.1.1 To activate the punch through channel setting:
• Press and hold [MUTE] and [Vol+] keys for 3 seconds until the LED remains on.
• Select the desired device key ( e.g. [TV] ), a successful selection is indicated by
the LED with one ash followed by permanent light.
• Enter the code [9] [6] [0], the LED will ash two times and then remain on.
• Press and release [Ch+] key, the LED will ash one time and then remain on.
• Press and release desired device key ( e.g. [STB] ), if the LED ashes three times
and then turns off it means the setting is activated.
6.1.2 To deactivate the punch through channel setting:
• Press and hold [MUTE] and [Vol+] keys for 3 seconds until the LED remains on.
• Select the desired device key ( e.g. [TV] ), a successful selection is indicated by
the LED with one ash followed by permanent light.
• Enter the code [9] [6] [0], the LED will ash two times and then remain on.
• Press and release [Ch-] key, the LED will ash one time and then remain on.
• Press and release desired device key ( e.g. [STB] ), if the LED ashes three times
and then turns off it means the setting is deactivated.
Note
• If you entered an incorrect code, the LED will blink 3 times and then remain
on, you can directly re-enter the correct code.
6.2 Punch Through Volume / Volume Lock and Unlock
The Punch Through Volume allows the Vol+, Vol- or MUTE commands to bypass the cur-
rently controlled device and adjust the volume on a second device. All other commands
remain unin uenced.
Note
• If there is no code under some devices for buttons [Vol+], [Vol-], [MUTE],
the remote will punch through this function to TV device and send related
TV code automatically.
6.2.1 Volume lock
• Press and hold [SETUP] key for 3 seconds until the LED remains on.
• Select the device you want to lock using the device key ( e.g. [TV] ), a successful
selection is indicated by the LED with one ash followed by permanent light.
• Press and release the [MUTE] key, the LED will ash one time and then remain
on.
• Press and release [Vol+] key, if the LED ashes three times and then turns off it
means the buttons [Vol+], [Vol-], [MUTE] have been locked successfully.
6.2.2 Volume unlock
• Press and hold [SETUP] key for 3 seconds until the LED remains on.
• Select the device you want to unlock using the device key ( e.g. [TV] ), a
successful selection is indicated by the LED with one ash followed by
permanent light.
• Press and release the [MUTE] key, the LED will ash one time and then remain
on.
• Press and release [Vol-] key, if the LED ashes three times and then turns off it
means the buttons [Vol+], [Vol-], [MUTE] have been unlocked successfully.
6