Tascam DR-10C Manual Del Usuario página 24

<model_select>
This indicates the Menu Screen
"CSHU", "CRAM" or "CSON".
i CSEN: DR-10CS (for Sennheiser)
i CSHU: DR-10CH or DR-10C with AK-DR10CH (for Shure) attached
i CRAM: DR-10C with AK-DR10CR (for SONY/RAMSA) attached and switch set
for RAMSA
i CSON: DR-10C with AK-DR10CR (for SONY/RAMSA) attached and switch set
for SONY
Example: <model_select>CSEN</model_select>
<file_name_type>
This indicates the Menu Screen
or "date".
Example: <file_name_type>date</file_name_type>
<file_name>
This indicates the Menu Screen
the file name.
Example: <file_name>DR0000</file_name>
<battery_type>
This indicates the Menu Screen
"ni-mh" or "lithium".
Example: <battery_type>alkali</battery_type>
<date>
This indicates the Menu Screen
the built-in clock. Notate it with 10 half-width (ordinary) characters including
hyphens in a "YYYY-MM-DD" format.
Example: <date>2014-08-27</date>
<time>
This indicates the Menu Screen
built-in clock. Notate it with 8 half-width (ordinary) characters including colons
in a "HH:MM:SS" format using 24-hour time.
Example: <time>23:59:59</time>
24
TASCAM DR-10C
setting. Notate it as "CSEN",
MODEL SELECT
setting. Notate it as "word"
FILE NAME TYP
setting. Use 6 characters to set
FILE NAME
setting. Notate it as "alkali",
BATTERY TYPE
date setting, which is used for
DATE/ TIME
time setting, which is used for the
DATE/ TIME
8 Sample notations
•
Example with all menu items
<dr10_syspara>
<mic_gain>low</mic_gain>
<mic_bias>off</mic_bias>
<low_cut>on</low_cut>
<limiter>off</limiter>
<auto_level>off</auto_level>
<fs_sample>48</fs_sample>
<bit_length>24bit</bit_length>
<file_type>MONO</file_type>
<dual_rec>off</dual_rec>
<time_track_inc>off</time_track_inc>
<beep>off</beep>
<auto_pwr_save>on</auto_pwr_save>
<model_select>CSEN</model_select>
<file_name_type>date</file_name_type>
<file_name>DR0000</file_name>
<battery_type>alkali</battery_type>
<date>2014-08-27</date>
<time>23:59:59</time>
</dr10_syspara>
•
Example with only the time setting
<dr10_syspara>
<time>23:59:59</time>
</dr10_syspara>