Idiomas disponibles
Idiomas disponibles
i ) Always follow the bit manufacturer's speed
recommendations as some bit designs require specific
speeds for safety or performance. If you are unsure of the
proper speed or are experiencing any type of problem, contact the
bit manufacturer.
j ) Do not use router bits with a diameter in excess of
63 mm (2‑1/2") in this tool.
k ) Keep cutting pressure constant. Too high of a pressure can
overload the motor or demage the workpiece.
l ) Provide clearance under workpiece for bit when
through‑cutting. There is a risk of cutting into objects below the
workpiece.
m ) Do not press spindle lock button while the motor is
running. Doing so can damage the spindle lock.
n ) Always make sure the work surface is free from nails and
other foreign objects. Cutting into a nail can cause the bit and
the tool to jump.
o ) Before starting the motor, clear the work area of all
foreign objects.
p ) Keep handles and gripping surfaces dry, clean, and free
from oil and grease. This will enable better control of the tool.
q ) Use sharp bits. Dull bits may cause the router to swerve or
stall under pressure.
r ) Do not use blunt or damaged cutting bits. Blunt or
damaged cutting bits cause increased friction, create imbalances
and may become jammed.
s ) DO NOT CUT METAL.
Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment of hearing.
• Risk of personal injury due to flying particles.
• Risk of burns due to accessories becoming hot during operation.
• Risk of personal injury due to prolonged use.
SAVE THESE INSTRUCTIONS
Battery Type
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB185,
DCB187, DCB189, DCBP034, DCBP034G, DCBP518, DCBP518G,
DCB546, DCB547, DCB547G, DCB548. Refer to Technical Data
for more information.
Package Contents
1 Plunge router
1 Airlock vac adaptor
1 Dust port cover
1 Side fence
1 Collet 8 mm
1 Collet 12 mm
1 Guide bushing
1 Subbase adaptor
1 Chip collector
1 Wrench 22 mm
1 Centering cone
1 Dust cap
1 Large dust cap 50 mm
1 Li-Ion battery pack (C1, D1, E1, G1, H1, L1, M1, P1, Q1, S1, T1,
U1, X1, Y1, Z1 models)
2 Li-Ion battery packs (C2, D2, E2, G2, H2, L2, M2, P2, Q2, S2,
T2, U2, X2, Y2, Z2 models)
3 Li-Ion battery packs (C3, D3, E3, G3, H3, L3, M3, P3, Q3, S3,
T3, U3, X3, Y3, Z3 models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D
WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
g
Wear ear protection.
f
Wear eye protection.
n
Visible radiation. Do not stare into light.
Date Code Position (Fig. B)
The production date code
48
by a 2-digit week and is extended by a 2-digit factory code.
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Battery pack
1
Battery pack release button
2
On/off trigger switch
3
Variable speed dial
4
Main handles
5
Plunge lock lever
6
Plunge release lever
7
Dust cap
8
Dust column
9
Base plate
10
Spindle lock button
11
Collet
12
Multiple position turret stop
13
Depth stop bar/rod
14
22 mm wrench
15
Depth indicator
16
Micro height adjustment
17
Lock-on button switch
18
EnGLIsH
consists of a 4-digit year followed
31
