Idiomas disponibles
Idiomas disponibles
EnGLIsH
18V MAX* PLUNGE ROUTER
DCW620
WARNING: Read all safety warnings, instructions,
illustrations, and specifications in this manual,
including the battery and charger sections provided in
an original tool manual or the separate Batteries and
Chargers manual. Manuals can be obtained by contacting
Customer Service (refer to the back page of this manual).
Technical Data
Voltage
Type
No-load speed
Plunging stroke
Max. Bit diameter
Collet size
Weight (without battery)
Wireless Tool Control Transmitter
Frequency Band
Max. Power (EIRP)
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-17:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a
h,hv
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission level
represents the main applications of the tool. However, if the tool is
used for different applications, with different accessories or is poorly
maintained, the vibration and/or noise emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or noise should
also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm (relevant for vibration),
organisation of work patterns.
28
DCW620
V
DC
min
-1
11000 - 23000
mm
mm
mm
kg
MHz
mW
dB(A)
dB(A)
dB(A)
=
m/s
2
m/s
2
EC‑Declaration of Conformity
Machinery Directive and Radio Equipment
Directive
DCW620
Plunge Router
D
WALT declares that these products described under
e
18V
Technical Data are in compliance with:
1
2006/42/EC, EN62841-1:2015 + AC:2015 + A11:2022;
EN62841-2-17:2017.
These products also comply with Directive 2014/53/EU and
70
2011/65/EU. For more information, please contact D
63
the following address or refer to the back of the manual.
8/12
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
3.62
433
0.03
Markus Rompel
Vice-President Engineering, PTE-Europe
D
WALT, Richard-Klinger-Strasse 11,
e
65510, Idstein, Germany
30.01.2024
73.8
DECLARATION OF CONFORMITY
84.8
THE SUPPLY OF MACHINERY (SAFETY) REGULATIONS
2.5
2008 AND RADIO EQUIPMENT REGULATION 2017
4.4
1.1
DCW620
Plunge Router
D
WALT declares that these products described under
e
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I. 2008/1597
(as amended), EN62841-1:2015 + AC:2015 + A11:2022;
EN62841-2-17:2017.
These products conform to the following UK Regulations
Radio Equipment Regulation, 2017, S.I.2017/1206 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Karl Evans
Vice President Professional Power Tools EANZ GTS
WALT at
e
WALT.
e
WALT at the following
e
WALT.
e
