Hilti DX 6 Manual De Instrucciones Original página 37

4.1 Bluetooth
DX 6 For products with Bluetooth
Frequency
Maximum emitted transmission power
4.2 Noise and vibration information
The noise values listed were determined under the following conditions:
Noise information conditions
Cartridge
Energy setting
Application
Noise information in accordance with EN 15895
Sound power level (L
WA
Emission sound pressure level (L
Peak sound pressure emission level (L
Vibration information in accordance with EN 2006/42/EG
Vibration emission
5 Preparations at the workplace
5.1 Assembling the fastening tool
1. Make sure that there are no cartridge strips in the fastening tool.
2. Bring the arrow marks into alignment and insert the exhaust gas piston return unit into the housing.
3. Insert the fastener guide or the magazine centered into the exhaust gas piston return unit.
4. Fit the piston.
5. Position the buffer on the fastener guide or the magazine.
6. Insert the fastener guide or the magazine centered and not tilted into the exhaust gas piston return unit.
7. Turn the fastener guide or the magazine clockwise until it engages.
▶ The fastener guide or the magazine is locked.
5.2 Fall arrest
WARNING
Risk of injury by falling tool and/or accessory!
▶ Use only the Hilti tool tether recommended for your product.
▶ Prior to each use, always check the attachment point of the tool tether for possible damage.
Comply with the national regulations for working at heights.
As drop arrester for this product, use only the Hilti tool tether #2261971.
*2232121*
6.8/11 caliber, black
6
Fastening 24 mm wood to concrete (C40) with X-P47 P8
)
)
pA
)
pCpeak
3
2232121
2,400 MHz ... 2,483.5 MHz
−27.2 dBm
106 ±2 dB
103 ±2 dB
134 ±2 dB
< 2.5 m/s²
English 29