Hilti SFD 2-A12 Manual Del Usuario página 9

▶
Wear protective gloves also when changing the accessory tool. Touching the accessory tool
presents a risk of injury (cuts or burns).
▶
Always hold the tool securely by the grip. If the accessory tool (e.g. the drill bit) sticks and stalls, the
power tool, due to its high torque, may tend to rotate about its own axis in the direction opposite
to that of the accessory tool.
▶
Make sure that the workplace is well ventilated and, where necessary, wear a respirator appropriate
for the type of dust generated. Contact with or inhalation of the dust may cause allergic reactions
and/or respiratory or other diseases to the operator or bystanders. Certain kinds of dust are
classified as carcinogenic such as oak and beech dust, especially in conjunction with additives for
wood conditioning (chromate, wood preservative). Material containing asbestos may be handled
only by specialists.
▶
Take breaks and exercise your fingers to improve the blood circulation. Exposure to vibration
during long periods of work can lead to disorders of the blood vessels and nervous system in the
fingers, hands and wrists.
Electrical safety
▶
Before beginning work, check the working area for concealed electric cables or gas and water
pipes. External metal parts of the power tool may give you an electric shock if you damage an
electric cable accidentally.
Power tool use and care
▶
Secure the workpiece. Use clamps or a vice to hold the workpiece in position. The workpiece is
thus held more securely than by hand and both hands remain free to operate the power tool.
▶
Immediately switch off the power tool if the accessory tool jams. The power tool might twist off-line.
▶
Wait until the power tool stops completely before you lay it down.
Description
1
Product overview
1/4" hex. socket with locking sleeve
@
Torque and drilling mode selector ring
;
Gear speed selection switch
=
Forward/reverse switch with switch-on
%
interlock
Grip
&
Intended use
The product described is a hand-held cordless drill / driver for driving and removing screws, drilling
in metal, wood and plastic.
▶
Use only Hilti Li­ion batteries of the B 12 series with this product.
▶
Use only Hilti battery chargers of the C4/12 series for charging these batteries.
Items supplied
Drill / driver, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store
or at: www.hilti.group
Technical data
Technical data
Product generation
Rated voltage
*2235440*
2235440
Lamp
(
Belt hook (optional)
)
Battery state of charge indicator
+
Battery release button
§
Control switch (with electronic speed
/
control)
SFD 2-A12
02
10.8 V
5