Idiomas disponibles
Idiomas disponibles
Weight
Speed in 1st gear
Speed in 2nd gear
Torque (soft joint)
Torque range (15 settings)
Ambient temperature for operation
Storage temperature
Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶
Before inserting the battery, make sure that the product is switched off.
▶
Remove the battery before making any adjustments to the power tool or before changing
accessories.
Observe the safety instructions and warnings in this documentation and on the product.
Charging the battery
1.Before charging the battery, read the operating instructions for the charger.
2.Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3.Use an approved charger to charge the battery.
Inserting the battery
WARNING
Risk of injury by short circuit or falling battery!
▶
Before inserting the battery, make sure that the contacts on the battery and the contacts on the
product are free of foreign matter.
▶
Make sure that the battery always engages correctly.
1.Charge the battery fully before using it for the first time.
2.Push the battery into the product until it engages with an audible click.
3.Check that the battery is seated securely.
Removing the battery
1.Press the battery release buttons.
2.Remove the battery from the tool.
6
SFD 2-A12
1.0 kg
(2.2 lb)
0 /min ... 400 /min
0 /min ... 1,600 /min
21 Nm
0.5 Nm ... 5 Nm
(0.4 ftlb
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)
10.8 V
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
4 ℃ ... 40 ℃
(39 ℉ ... 104 ℉)
5
2235440
*2235440*
... 4 ftlb
)
f
f
