Idiomas disponibles
Idiomas disponibles
Fitting the belt hook (optional)
WARNING
Risk of injury. A falling power tool may present a risk of injury to yourself and others.
▶
Check that the belt hook is fitted securely before beginning work.
The belt hook allows the power tool to be attached to a belt worn by the operator. The belt
hook can be fitted to allow attachment on the left or right side of the body.
1.Remove the battery.
2.Insert the belt hook in the opening provided at the base of the screwdriver's grip.
3.Secure the belt hook with the 2 screws.
4.Check that the belt hook is secure on the power tool.
Types of work
CAUTION
Risk of damage by incorrect handling!
▶
Do not operate the switches for direction of rotation and/or function selection during operation.
Observe the safety instructions and warnings in this documentation and on the product.
Fitting the accessory tool
1.Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2.Insert the accessory tool into the chuck.
3.Check that the accessory tool is held securely.
2
Selecting the gear
▶
Select the gear you want to use by setting the gear selector switch to the appropriate position.
Setting the torque
▶
Set the desired torque.
The torque is limited only when the power tool is set to screwdriving mode
Setting forward or reverse rotation
An interlock prevents switching while the motor is running.
The control switch is locked when the forward/reverse switch is in the middle position (switch-
on interlock).
▶
Set the forward/reverse switch to the desired direction of rotation.
*2235440*
6
3
2235440
.
7
