Fume Extraction; Installation Underneath Extraction Hood; Connecting Up Gas; Installation Instructions - OFFCAR 7FRG-17R Manual De Instrucciones, Uso Y El Mantenimento

1.3 FUME EXTRACTION

The appliances must be installed in compliance with installation regulations in premises with adequate fume evacuation
systems.

INSTALLATION UNDERNEATH EXTRACTION HOOD

1.4 CONNECTING UP GAS

Only qualified persons must be entrusted with installation operations, adapting the appliance to different types of gas,
commissioning and eliminating system faults. All current rules and regulations must be complied with.
The gas fittings, wiring and the premises on which the appliance is installed must comply with current rules and
regulations. In particular, for combustion, burners require 2 m3/h per kW of installed power.
Accident prevention and fire and anti-panic safety regulations must be enforced in places that are open to the public.

INSTALLATION INSTRUCTIONS

Pag. 12
If the appliance is installed underneath an extraction
hood, comply with the following instructions:
The volume extracted must be greater than the volume
of burnt gas generated (see current regulations).
The gas supply to the appliance must be controlled
directly by the supply system and must be cut off
immediately pressure falls below the prescribed
values.
It must be possible to reconnect the gas supply to the
appliance only manually.
This must be fitted after the oven has been positioned
underneath the extraction hood.
The end of the appliance's evacuation pipe must be
placed inside the hood's base perimeter (Fig. 2).