Parkside PADM 1250 A1 Traduccion Del Manual De Instrucciones Originale página 26

GB MT
Safe working
• Keep your work area tidy
– An untidy workplace can lead to acci-
dents.
• Consider environment infl uences
– Do not expose power tools to rain.
– Do not use power tools in damp or
wet surroundings.
– Ensure the work area is adequately
lit.
– Do not use power tools where there is
a fi re or explosion hazard.
• Protect yourself against electric
shock
– Avoid body contact with earthed
parts (e.g. pipes, radiators, electric
cookers, refrigerators).
• Keep other people away!
- Do not allow other people, especially
children, to touch the power tool or
cable, and keep them away from
your work area.
• Store unused power tools safely
– Unused power tools should be stored
in a dry, high or locked place, out of
the reach of children.
• Do not overload your power
tool
– They work better and more safely
within the specifi ed power range.
• Use the correct power tool
– Do not use low-performance electric
tools for heavy work.
– Do not use the power tool for purpos-
es for which it is not intended. For
example, do not use a circular hand
saw for cutting tree branches or logs.
• Wear suitable clothing
– Do not wear loose clothing or jew-
ellery that might become caught in
moving parts.
– When working outdoors, non-slip
footwear is recommended.
26
– Wear a hair net to contain long hair.
• Use protective equipment
– Wear safety goggles.
– Use a dust mask for work which gen-
erates dust.
• Connect a dust extraction device
– If connections are available for dust
extraction and collection devices,
make sure that these are connected
and properly used.
• Do not use the cable for purpos-
es for which it is not intended
– Do not use the cable to pull the plug
from the socket. Protect the cable from
heat, oil and sharp edges.
• Secure the workpiece
– Use jigs or a vice to hold the work-
piece securely. This is safer than using
your hand.
• Avoid abnormal body postures
– Ensure secure footing and keep your
balance at all times.
• Maintain tools with care
– Keep cutting tools sharp and clean for
better and safer working.
– Follow the instructions for lubrication
and changing tools.
– Regularly check the connection cable
of the power tool and, if it is dam-
aged, have it replaced by a qualifi ed
specialist.
– Check extension cords periodically
and replace them if they are dam-
aged.
– Keep handles dry, clean and free
from oil and grease.
• Remove the plug from the mains
socket
– When the electric tool is not in use,
before maintenance and when chang-
ing tools such as the saw blade, drill
bit, milling cutter.
• Do not allow any tool keys to
remain inserted