Generac 006001-0 Manual Del Propietário página 9

Generador portatil serie lp de 5500 w
Ocultar thumbs Ver también para 006001-0:
Idiomas disponibles

Idiomas disponibles

Section2
GeneralInformation
2.1 -- Unpacking
Remove all packaging material.
Remove separate accessory box.
Remove the generator from carton.
2.1.1 -- Accessories
Check all contents. If any parts are missing or damaged, locate an
authorized dealer at 1-888-436-3722.
Product Registration and Warranty Cards
1 - Owner's Manual
1 - Liter Oil SAE 10W-30
2 - Never-Flat Wheels
2 - Frame Feet
1 - Fuel Cylinder Retaining Strap
1 - Oil Funnel
1 - Hardware Bag (containing the following):
-- 2-Rubber Feet (A)
-- 4-M8 Bolt (Long) (E)
-- 2-5/8" Axle Pins (B)
- 2-M6 Bolts (Long) (F)
-- 2-Cotter Pins (Hairpin) (C)
- 4-Hex Flanged M8 Nuts (G)
-- 2-5/8" Flat Washers (D)
- 2-Hex Flanged M6 Nuts (H)
-- Spark Plug Service Tool
- 1- Cotter Pin (Strap)
2.2 -- Assembly
The generator requires some assembly prior to using it. If problems
arise when assembling the generator, please call the Generator Help-
line at 1-888-436-3722.
2.2.1 -- Assembling the Accessory Kit
The wheels are designed into the unit to greatly improve the portabil-
ity of the generator.
You will need the following tools to properly install the accessory kit.
Needle Nose Pliers
Ratchet and 8mm, 10mm, and 13mm sockets
12ram, 10ram, and 13ram box wrenches
NOTE:
The wheels are not intended for over-the-road use.
1.
Refer to Figure 2-1 and install the Wheels as follows:
-- Slide the Axle Pin through the Wheel, Wheel Bracket on the
frame and 5/8" Flat Washer.
-- Insert the Cotter Pin through the Axle Pin to lock into place.
.
Refer to Figure 2-2 and install the Frame Feet and Rubber Bum-
pers as shown.
-- Slide the Rubber Bumper [v16 Bolts through the Frame Foot,
Rubber Bumper. Then install the Locking Flange Nuts.
Tighten securely.
-- Slide the Hex Head Bolts through the holes in the Frame Rail.
-- Slide the Frame Foot onto the Hex Head Bolts then install the
Locking Flange Nuts. Tighten securely.
Figure 2-1: Wheel & Feet Assembly
G
E
H
Figure 2-2: Frame Feet and Rubber Bumpers
Figure 2-3: Fuel Cylinder Retaining Strap
5,500 Watt LP Series Portable Generator
5
loading