16. ELECTROMAGNETIC COMPATIBILITY (EMC)
Medical electrical devices are subject to special precautionary measures with regard to electromagnetic compatibility. This device can be affected
by other electrical devices.
WARNING
Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper
operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are
operating normally
Use of accessories, transducers and cables other than those specified or provided by the manufacturer of this equipment could
result in increased electromagnetic emissions or decreased electromagnetic immunity of this equipment and result in improper
operation.
Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used
no closer than 30 cm (12 inches) to any part of the Triango 60, including cables specified by the manufacturer. Otherwise,
degradation of the performance of this equipment could result.
Electromagnetic environment
The device may only be operated in the environments specified in the "Intended Use" section of the Operating Instructions. The
medical device is intended for use in the electromagnetic environment specified below
The above listed models are intended for use in the electromagnetic environment specified below. The customer or the user
of the above listed models should assure that they are used in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
Compliance
The above listed models use RF energy only for its internal function.
Group 1
Therefore, its RF emissions are very low and are not likely to cause any
Class B
The above listed models are suitable for use in all establishments, including
Class A
domestic establishments and those directly connected to the public low-
voltage power supply network that supplies buildings used for domestic
Complies
Electromagnetic environment - guidance
interference in nearby electronic equipment.
purposes.
ENG
43