Idiomas disponibles
Idiomas disponibles
ENG
After inserting the wall arm, first install the ring "A", then
the locking ring "B" followed by the closing ring "C".
D
Carefully insert the rotary connector "D".
B
A
C
Install joint covers "B" and screw in screws "C".
Attach covers "A".
DANGER
Danger to life through an electric shock.
Do not switch on the mains power supply before the
light head has been installed
To continue with the installation of thelight head, see
Section
34
A
B
C
A
5.
INSTALLATION: Triango 60 F
Remove the M3 screws at the sides and then remove
the power supply unit tub "A".
Lead the upright rod cable through the roller stand.
Fasten the upright rod "B" to the roller stand using the
2 Allen screws and serrated washers "C" (10 Nm).
The cable holder must be oriented to the rear.
Pull off the covers "A" of the spring arm carefully.
Remove the M4 hexagon socket screws together with
the washer.
6.
A
B
C
A
