1. Unlock vacuum nozzle. While doing
so, step on the tread and swing the
handle backwards. The roller brush
is switched on.
2. Perform cleaning.
3. Work interruption/end of cleaning:
Lock the vacuum nozzle. While do-
ing so, step on the tread and swing
the handle forward. The roller brush
is switched off.
Semi-automatic brush cleaning
Note
The semi-automatic brush cleaning
can only be switched on when the de-
vice is switched on.
Note
The semi-automatic brush cleaning
should be operated at least once a day,
depending on the application, to re-
move light soiling. For heavier soiling,
see "Cleaning the roller brush manual-
ly".
Recommendation for use of brush
cleaning:
● For very heavily frequented areas
(e.g. in schools), after the full-sur-
face cleaning of approx. 50 m²
● For areas with average traffic (e.g.
offices), after the full-surface clean-
ing of approx. 1,000 m²
● for less frequented areas (e.g. hotel
rooms), approx. 1x daily
1. Press the foot button of the semi-au-
tomatic brush cleaning. Step on the
foot pedal 3 times for 5 seconds, but
not longer than 20 seconds without
interruption. This results in system-
related noise development.
Wand operation
Note
For cleaning,for example, edges,
ledges, niches, corners.
1. Pull the wand out of the mount. The
brush motor is automatically
switched off.
2. Attach the desired accessory to the
wand.
3. Perform cleaning.
Note
When inserting the wand into the
mount, ensure that the wand is posi-
tioned correctly (see figure A).
Switching off the device
1. Switch off the device at the main
switch.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transportation.
1. Carry the device by the carrying
handle.
2. When transporting the device in ve-
hicles, secure it to prevent it from
slipping or overturning in accor-
dance with the respective valid
guidelines.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during storage.
The device may only be stored in-
doors.
1. Press the unlocking button and re-
move the battery pack to prevent
discharge.
English
Transport
Storage
11