klover PELLET FIRE PLACE 18 Manual De Instrucciones página 66

Find all of the parameters in detail below:
UT01
The parameter allows to set the current day of the week, select functioning day by day (weekly mode) or disconnect programming.
Lun
Mar
Mer
Gio
Ven
Sab
Dom
OFF
It is possible to set 4 time intervals when to switch the insert on during the day. If the UT01 parameter is set with the current day (for example Tuesday/Tue)
it is possible to associate the ignition of PROGRAM 1, 2, 3 and 4. By pressing buttons 1 and 2 the desired value can be selected. This can be carried out for
every day of the week, as there is the possibility to select on which days to ignite the insert and on which days to leave it off.
UT02
The parameter allows to set the current time. The time is shown in the lower display.
UT03
Used to set the minutes.
UT04
Reserved technical parameter. Only for After-sales centres.
UT05 - UT06
Parameters to respectively set the switch-on and switch-off time of PROGRAM 1. Their setting is active whenever the UT01 parameter is set in weekly
mode.
UT07
This parameter is active and assumes meaning when the UT01 parameter is set in weekly mode. When PROGRAM 1 programming is active, use button 1 to
select the day of the week and use button 2 to activate/deactivate ignition of the insert. The example that follows shows ignition of the insert takes place only
on Saturday and Sunday.
Lun Mar
Monday Tuesday
Lun/off Mar/off
UT08 - UT09
Parameters to respectively set the switch-on and switch-off time of PROGRAM 2. Their setting is active whenever the UT01 parameter is set in weekly
mode.
UT10
This parameter is active and assumes meaning when the UT01 parameter is set in weekly mode. When PROGRAM 2 programming is active, use button 1 to
select the day of the week and use button 2 to activate/deactivate ignition of the insert. The example that follows shows ignition of the insert takes place only
on weekdays.
Lun Mar
Monday Tuesday
Lun/on Mar/on
UT11 - UT12
Parameters to respectively set the switch-on and switch-off time of PROGRAM 3. Their setting is active whenever the UT01 parameter is set in weekly
mode.
UT13
This parameter is active and assumes meaning when the UT01 parameter is set in weekly mode. When PROGRAM 3 programming is active, use button 1 to
select the day of the week and use button 2 to activate/deactivate ignition of the insert. The example that follows shows ignition of the insert takes place only
on Saturday and Sunday.
Lun Mar
Monday Tuesday
Lun/off Mar/off
UT14 - UT15
Parameters to respectively set the switch-on and switch-off time of PROGRAM 4. Their setting is active whenever the UT01 parameter is set in weekly
mode.
UT16
This parameter is active and assumes meaning when the UT01 parameter is set in weekly mode. When PROGRAM 4 programming is active, use button 1 to
select the day of the week and use button 2 to activate/deactivate ignition of the insert. The example that follows shows ignition of the insert takes place only
on Saturday and Sunday.
Lun Mar
Monday Tuesday
Lun/off Mar/off
Upper display
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Chrono-thermostat off
Mer
Wednesday Thursday
Mer/off Gio/off
Mer
Wednesday Thursday
Mer/on Gio/on
Mer
Wednesday Thursday
Mer/off Gio/off
Mer
Wednesday Thursday
Mer/off Gio/off
14
Meaning
Gio Ven
Friday
Ven/off
Gio Ven
Friday
Ven/on
Gio Ven
Friday
Ven/off
Gio Ven
Friday
Ven/off
Sab Dom
Saturday Sunday
Sab/on Dom/on
Sab Dom
Saturday Sunday
Sab/off Dom/off
Sab Dom
Saturday Sunday
Sab/on Dom/on
Sab Dom
Saturday Sunday
Sab/on Dom/on