Some Precautions; Destination Of Use; Installation Regulations; Health And Safety - klover PELLET FIRE PLACE 18 Manual De Instrucciones

Some Precautions


Do not touch the hot components of the product (ceramic glass, flue pipe) during normal functioning

Use the appropriate button to switch the electrical panel off. Do not disconnect the power supply cable while the insert is running.

Keep children away from the insert when it is running since they could get burned by touching its hot components.

Children and inexperienced people are not allowed to use the appliance

NEVER open the door of the insert while it is running

Destination of use

The new automatic functioning Pellet Fire Place insert by KLOVER has been designed for heating your home.
The insert works exclusively with wood pellets and only with the hearth door shut. Never open the door when the appliance is running.
The insert has a DOUBLE COMBUSTION system that guarantees an extraordinary efficiency average and "clean" flue gas exhaust with an emission of CO
in the atmosphere which is among the lowest in Europe.
Do not use the insert in disagreement with the indications contained in this user guide. The insert is an indoor product.
This user guide is integral part of the insert.
If the product is transferred the user must give this manual to the new purchaser.
KLOVER S.R.L. DECLINES ANY RESPONSIBILITY IN CASE OF ACCIDENTS DUE TO THE FAILURE TO COMPLY WITH THE SPECIFICATIONS OF
THIS MANUAL.
FURTHERMORE KLOVER S.R.L. DECLINES ANY RESPONSIBILITY DUE TO INCORRECT USE OF THE PRODUCT BY THE USER, MODIFICATION
AND/OR UNAUTHORISED REPAIRS, USE OF NON - ORIGINAL SPARE PARTS OR SIMPLY NOT SPECIFIC FOR THIS PRODUCT.
KLOVER S.R.L. IS NOT RESPONSIBLE FOR INSTALLATION OF THE PRODUCT. THE INSTALLER IS THE ONLY PERSON RESPONSIBLE FOR
THIS OPERATION AND HE IS ALSO ENTRUSTED WITH CHECKING THE FLUE, THE EXTERNAL AIR VENT AND THE CORRECTNESS OF THE
SOLUTIONS SUGGESTED FOR INSTALLATION. ALL THE SAFETY STANDARDS CONTAINED IN THE SPECIFIC LAW IN FORCE OF THE STATE
WHERE THE SAME IS INSTALLED MUST BE RESPECTED.
EXTRAORDINARY MAINTENANCE MUST ONLY BE PERFORMED BY AUTHORISED AND QUALIFIED STAFF
For the validity of the warranty, the user must comply with the provisions contained in this guide and in particular:

Use the insert according to its operational limits;

All maintenance must be performed constantly;

Only authorise expert and competent people to use the insert.
Failure to comply with the requirements of this guide makes the warranty automatically null and void.

Installation Regulations

These operating and instructions cover the basic principles to ensure the correct installation of the pellet stove, although particulars may need modification
to reflect local site conditions. In all cases the installation must comply with current Building Regulations, Local Authority By-laws and other regulations that
affect the installation of the stove.
The Building Regulations requirements can be met by adopting the relevant recommendations given in British Standards BS 8303, BS 6461 and BS 7566
as an alternative means to achieve an equivalent level of performance to that obtained by following the guidance given in Approved Document J.

Health and Safety

Care must be taken when installing a Klover pellet stove to ensure that the requirements of the Health and Safety at Work Act are met.
Handling
Adequate facilities must be available for loading, unloading and site handling the appliance bearing in mind the weight of the appliance.

THE MACHINE AND THE PELLETS

Insert components

MASTER SWITCH, POWER SUPPLY
CABLE CONNECTION AND TWO
INCORPORATED FUSES (4A 250V)
SYSTEM PRESSURE
MANOMETER
POWER
BOARD
3
ROOM THERMOSTAT
CONNECTION CLAMP
FLUE
PRESSURE
SWITCH
FLUE
EXHAUST