Introduction; Important Security Instructions - klover PELLET FIRE PLACE 18 Manual De Instrucciones

Dear Customer,
Carefully read the warranty certificate you will find on the last page of this User Guide; we recommend you call the Authorised Technical Assistance Centre
(TAC) for commissioning and calibrating the stove.
We would like to thank you again for trusting KLOVER products and we also inform you that these models are the result of forty years experience in the
field of construction of solid fuel products for domestic heating.
Every single detail that composes the stove has been realised by qualified staff, using the most modern equipment.
The manual contains a detailed description of the stove and its functioning, instructions for proper installation, basic maintenance and control points, which
must be periodically performed; furthermore it contains practical advice which helps to obtain maximum performance from the stove with minimum fuel
consumption.
The heat input produced by the stove can change depending on used pellet.
Enjoy the heat with KLOVER!
Technical Support
Klover pellet stoves are imported and distributed by FirePower Heating, Unit 11/12 Quadrant Distribution Center, Quedgeley, Gloucester, GL2 2RN.
UK technical and product support is provided by FirePower Heating who can be reached on 0844 3320156.
Certificate number : NQA B 0002/33 - NQA B 0002/34
Copyright
All rights reserved. The reproduction of any part of this manual, in any form, without the explicit written permission of KLOVER srl is forbidden. The content
of this manual can be modified without forewarning. Although we have carefully collected and verified the documentation contained in this manual,
KLOVER srl cannot be held liable for how you utilise it.
Copyright © 2013 KLOVER srl
Latest revision: Rev 1.5 – May 2014
Smoke Control Areas
Under the Clean Air Act local authorities may declare the whole or part of the district of the authority to be a smoke control area. It is an offence to emit
smoke from a chimney of a building, from a furnace or from any fixed boiler if located in a designated smoke control area. It is also an offence to acquire an
"unauthorised fuel" for use within a smoke control area unless it is used in an "exempt" appliance ("exempted" from the controls which
generally apply in the smoke control area). The Secretary of State for Environment, Food and Rural Affairs has powers under the Act to authorise
smokeless fuels or exempt appliances for use in smoke control areas in England. In Scotland and Wales this power rests with Ministers in the devolved
administrations for those countries. Separate legislation, the Clean Air (Northern Ireland) Order 1981, applies in Northern Ireland. Therefore it is a
requirement that fuels burnt or obtained for use in smoke control areas have been "authorised" in Regulations and that appliances used to burn solid fuel in
those areas (other than "authorised" fuels) have been exempted by an Order made and signed by the Secretary of State or Minister in the devolved
administrations. Further information on the requirements of the Clean Air Act can be found here :
http://smokecontrol.defra.gov.uk/
Your local authority is responsible for implementing the Clean Air Act 1993 including designation and supervision of smoke control areas and you can
contact them for details of Clean Air Act requirements"
"The Klover Pellet Fire Place (models - PFP18, PFP18-B) have been recommended as suitable for use in smoke control areas when burning
wood pellets."

INTRODUCTION

Important security instructions

Read these instructions before installing and using the product.

Insert installation and commissioning must be performed by skilled staff aware of the importance of respecting the Safety Standards in
force. They will be responsible for the definitive installation of the machinery and its consequent proper functioning.
KLOVER Srl will not be held responsible if these precautions are not respected.

During installation of the appliance all local regulations, included those referring to National and European Standards must be followed.

Connect the product flue gas outlet to a flue that has the features given in the Connections section in this user guide.

The appliance is not suitable for the installation on a shared flue system.

If the flue should catch fire, you must be provided with appropriate systems for damping down the fire or call the fire service.

Connect the product to sockets with earth. Avoid using sockets controlled by switches or automatic timers.

Do not use a damaged or worn power supply cable.

If a multiple socket is used, make sure that the total voltage of the connected devices does not exceed that supported by the socket. Furthermore
make sure that the total voltage of all these devices connected to the socket does not exceed the maximum level accepted.

Do not use flammable substance for cleaning the appliance and its elements.

Do not leave containers and flammable substance in the place where the insert system is installed.

Do not use the appliance as incinerator or in any other way different to that for which it has been designed.

Do not use fuels different to those which are recommended

Do not use liquid fuels

The external surfaces of the appliance reach high temperatures when it is running; operate with caution in order to avoid burns.

Only use original spare parts recommended by the manufacturer.

Do not perform any unauthorised modification to the appliance.

The use of poor pellets or pellets made of any other material can lead to damage of the insert functions and can also make the warranty null
and void and make the manufacturer exempt from all responsibility.

The Klover pellet products are not suitable for use in smokeless zones.
we would firstly like to thank you for choosing a "KLOVER" stove and we hope you will be satisfied with this product.
2