Defining The Number Of Cycles; Pause After An Unsuccessful Cycle - HumanTechnik flashtel comfort II f Instrucciones De Servicio

Setting the number of cycles
A cycle is defined as dialing all the programmed SOS phone numbers in one
consecutive sequence. By setting the number of cycles you will define how
frequently the phone numbers are to be dialed.
P
1. Press the
2. Enter the four-digit device PIN "XXXX" (the telephone's default PIN code
is "0000").
3. Enter the code "350".
4. Enter the number of cycles using the number keys 1-8.
If you press 9, the telephone will keep transmitting the SOS call until it is
answered.
P
5. Press the
6. Re-enter a code or press the
Note:
the telephone's default is 3 cycles.

Pause after an unsuccessful cycle

You can specify the pause (1-9 minutes) between the end of an unsuccessful
cycle and the start of a new cycle.
P
1. Press the
2. Enter the four-digit device PIN "XXXX" (the telephone's default PIN code
is "0000").
3. Enter the code "351".
58 English
button and then the
button to save the changes.
P
button and then the
*
button.
button to exit the Settings menu.
*
button.