Settings - Tone/Pulse Dialing - Hook/Flash - Pabx - Pin; Tone/Pulse Dialing; Hook/Flash - HumanTechnik flashtel comfort II f Instrucciones De Servicio

Settings - Tone/pulse dialing - Hook/Flash - PABX - PIN

Tone/pulse dialing

P
1. Press
2. Enter one of the following three codes:
a. Code "10" for tone dialing
b. Code "11" for pulse dialing (33% M/B)
c. Code "12" for pulse dialing (40% M/B)
3. Press P
4. Enter another code or press
Note:
Nowadays, most telephone connections use tone dialing.

Hook/Flash

You can set the flash key to different flash times. The flash setting usually does
not have to be altered when the telephone is connected to a larger telephone
system (see the operating manual for the telephone system).
P
1. Press
2. Enter the four-digit unit PIN "XXXX" (the default PIN code for the
telephone is "0000").
3. You can now enter one of the following codes:
a. Code "700" sets the flash time to "90 ms",
b. Code "701" sets the flash time to "110 ms",
c. Code "702" sets the flash time to "130 ms",
d. Code "703" sets the flash time to "260 ms" or
e. Code "704" sets the flash time to "600 ms".
P
4. Press
5. Enter another code or press
52 English
#
and then
to store the settings.
and then *
to store the settings.
to quit the settings menu.
P
to quit the settings menu.
P