Sos Mode - Programming; Storing An Sos Recorded Message - HumanTechnik flashtel comfort II f Instrucciones De Servicio

SOS mode – Programming
When you enable the SOS mode setting, you should program the following
settings:
1. Store an SOS recorded message
2. Store the SOS phone numbers
3. Set the number of cycles
4. Set the length of pause after an unsuccessful cycle
5. Set the duration of the active connection
6. Assign SOS hand-operated transmitters
7. Enable SOS mode

Storing an SOS recorded message

1. Press the
P
2. Enter the four-digit device PIN "XXXX" (the telephone's default PIN
code is "0000").
3. If you enter the code "354", "Start" appears on the display.
4. Keep the button
message (max. 20 seconds).
5. Release the button
Re-enter a code or press the
Note:
When an SOS call is received, the SOS recorded message is automatically
played. On the one hand, the SOS recorded message should be kept short
(max. 20 seconds), although it should contain all the information that the
recipient requires in order to take immediate steps to provide aid quickly.
button and then the
pressed while you record the SOS recorded
again to stop recording.
P
*
button.
button to exit the Settings menu.
English 55