Idiomas disponibles
Idiomas disponibles
USER MANUAL
6. DAILY MAINTENANCE
•
CLEANING
Use a dry or damp cloth to wet some neutral cleaner to clean the surface of the water
heater, do not use gasoline or other solvents, you should not spray water.
•
DESCALING
According to local water quality conditions, when the water heater is used a certain time
(usually 1 month), it is necessary to remove dirty lime: first turn off the water heater, close
the inlet valve, separate the connection between inlet and outlet, empty the water from
the internal tank. After descaling, reinstall the internal tank connection between inlet and
outlet.
•
DRAINING
In case of prolonged outage or maintenance, first cut off the power supply, close the water
inlet valve, separate the connection between the inlet and outlet water pipe, empty it upside
down and install the connection between the internal tank and the connection between the
inlet and outlet water. When used again, the inside of the tank must be filled with water
before connecting the power supply.
•
REPLACE THE MAGNESIUM ANODE
In case of prolonged outage or maintenance, first cut off the power supply, close the water
inlet valve, separate the connection between the inlet and outlet water pipe, empty it upside
down and install the connection between the internal tank and the connection between the
inlet and outlet water. When used again, the inner tank must be filled with water before
connecting the power supply.
CAUTION
1.
Unplug the power cord before performing maintenance.
2.
Non-professional maintenance personnel are strictly prohibited from
disassembling, maintaining and modifying the water heater.
3.
The safety valve (pressure relief devices) needs to be actioned regularly, to remove
calcium carbonate sediments and test that it is not blocked.
4.
If it is blocked, please repair it in time.
22
ELECTRIC WATER HEATER
ESSENTIAL HIDE
