HTW ESSENTIAL HIDE Manual De Usuario página 23

ELECTRIC WATER HEATER
IDENTIFY AND SOLVE THE MOST COMMON FAULTS
If the water heater breaks down during normal use, please immediately turn off the power,
and check according to the following content.
Breakdowns
The water does not
flow
Water does not flow
hot
The flowing water
comes out hot and cold
The water drips down
the valve outlet
of security
The water drips
continually of the
valve outlet
of security
Brown
L
Yellow, green
E
Blue
N
Plug
feeding
ESSENTIAL HIDE
Reasons
1. If the water is turned off or the
pressure is too low
2. If the water inlet and outlet
globe valve is open
3. If the pipes are blocked
1. Excess cold water mix
2. Low temperature setting
3. Insufficient warm-up time
4. Internal circuit breakdown
The external pressure of
water is unstable
Normal
The water pressure is
too high
Thermal cut
USER MANUAL
5. IDENTIFY AND RESOLVE FAULTS
Solution
1. Check water supply
2. Open the water inlet and
outlet globe valve
3. Clean the pipes
1. Adjust mixing valve
2. Adjust the temperature
3. Keep heating
4. Maintenance
Wait for the pressure
of the water is normalized
Connect the drain pipe
and route it to a safe drain
Install a valve pressure
limiter in the water inlet pipe
21
