SICE S 65 Manual De Instrucciones página 102

- the third counter value is the number of wheel spins performed since the last sensitivity
calibration.
Press Exit
If the automatic measuring arm fails to operate, the geometric data can be entered manu-
ally by following the procedure below:
- select the manual wheel data entry icon
- the data screen showing the icons is displayed:
manual wheel data change;
unit-of-measurement (inch/mm) change;
displays the help information regarding the current screen.
- Select the dimension change icon
- the wheel balancer prepares for manual entry of
the width;
- use the keypad to overwrite the displayed value
with the value measured with the manual calliper
(Fig. 19);
- press the Enter button
switch to the diameter value entry phase;
- change the value of the diameter displayed by en-
tering that indicated on the tyre using the keypad;
- press the Enter button
switch to the distance value entry phase;
102
to hide the counters.
Manual wheel data entry function
to confirm and
to confirm and
;
;
19
User manual S 65