Unpacking And First Operation; Unpacking And First Operation Of The Titrator; Installing The Z 300 Rod Foot Plate (Optional) - Xylem SI Analytics TitroLine 6000 Manual De Instrucciones

94
Chapter 2 - Unpacking and first Operation

2 Unpacking and First Operation

2.1 Unpacking and First Operation of the titrator

The titrator itself as well as all related accessory and peripheral parts have been carefully checked at the factory
to ensure their correct function and size.
Please ensure that the small accessories are also removed in full from the packaging.
For the scope of delivery, please refer to the enclosed parts list.
®
The titrator TitroLine 6000/7000 may be placed on any flat surface.

2.2 Installing the Z 300 Rod Foot Plate (Optional)

If the TM 235 magnetic stirrer is not in use, it is recommended to use the Z 300 rod foot plate. The Z 300 rod foot
plate is made of solid metal (fig. 1). The bottom of the device contains a recess which is precisely worked to
accommodate the metal foot plate. The metal foot plate itself features one thread on both sides (top and bottom)
to hold the stand rod (coming with the basic device). This means that the metal foot plate can be used both to the
left and to the right of the device, depending on the specific needs. The basic device is to be placed on the metal
foot plate; subsequently the stand rod is screwed into the thread. Now it is possible to install the Z 305 titration
clamp (included with the basic device) on the stand rod (fig. 2).
Fig. 1
Fig. 2