DeLonghi La Specialista OPERA EC9555 Instrucciones De Uso página 14

Ocultar thumbs Ver también para La Specialista OPERA EC9555:
Idiomas disponibles

Idiomas disponibles

14. Pull out and empty the drip tray, then reinsert it.
15. Remove the tank, fill with cold water and return it to the
machine.
16. The OK indicator turns white.
The machine is now ready for use.
Please note:
The descaling cycle can be started up at any time (even if
the relative indicator is not yet on).
Should descaling be started up by mistake, it can be
stopped by pressing the
seconds; the rinse cycle cannot be stopped.
After 30 seconds without a button being pressed, the ma-
chine exits the descaling program automatically.
11. CLEANING THE COFFEE SPOUT (A19)
When the
indicator lights up (orange) (B11), it means
that the coffee circuit needs to be cleaned. Use De'Longhi clean-
ing tabs (C10) to carry out the cleaning cycle. For more informa-
tion, visit delonghi.com.
1. Insert the 1-cup filter (C2) in the holder (C1) (fig. 26).
2. Position the cleaning accessory in the filter (C9) (fig. 27)
and press home.
3. Place the cleaning tab on the accessory (fig. 28).
4. Attach the portafilter to the coffee spout (A19).
5. Fill the tank(A15) with water. Make sure the drip tray (A11)
is empty.
12. EXPLANATION OF INDICATORS
INDICATORS
All lights blink briefly
permanently on
permanently on (white)
1x - 2x indicators: the number of cups
must be selected
light: indicates the selected coffee
temperature
indicator: indicates the ma-
chine is ready to deliver hot water
Hot drink indicator: indicates the drink
selected
button and holding for 10
EXPLANATION OF INDICATORS
Turning the machine on
The machine has been turned on for the
first time and the water circuit must be
filled
The machine is ready to deliver hot
drinks
6. Press the
button (B5) and hold until the
tor (B11) starts to blink.
7. Press OK (B4) to start cleaning: the OK indicator blinks to
indicate that cleaning is in progress.
8. When delivery stops and the OK indicator turns blue, it is
time to run a rinse cycle.
9. Remove the cleaning accessory, and wash the portafilter
and the filter under running water.
10. Attach the portafilter again and run a rinse cycle by press-
ing the OK button: it is advisable to place a container under
the portafilter.
11. Once the rinse has been completed, the machine is ready
for use.
12. Remove and empty the drip tray.
Please note:
The cleaning cycle can be started up at any time (even if the
relative indicator is not yet on).
Should the cleaning cycle be started by mistake, press the
button and hold for 10 seconds; the rinse cannot be
stopped.
After 30 seconds without a button being pressed, the ma-
chine exits the cleaning cycle automatically.
OPERATION
Self-diagnosis
Proceed as indicated in section "3. Setting up
the machine"
Set up the machine and proceed with prepa-
ration of the drink
14
indica-
loading