CASO DESIGN HW 770 Advanced Manual Del Usuario página 68

DE
4.1 Safety information
EN
ATTENTION
NL
Please observe the safety instructions, before cleaning your device:

SV
Unplug the device when not in use and before any cleaning.

Never immerse the device, cord or plug in water or other liquids and do not place in
FR
the dishwasher.

Do not use iron brush, abradant, kitchen cleaner, or sharp cleaning tool for cleaning.
IT
4.2 Cleaning and descaling
ES
Wipe the device with damp cloth.
RU
4.2.1 Cleaning and descaling function
PT
When "Descale" is blinking in the display then the device needs to be descaled, please pro-
TR
ceed as follows:
1.
Place device without drip tray and without water lter.
2.
Fill the watertank up to max marking. Add a little bit of vinegar.
3. Fill the water tank up to the "MAX" mark with a mixture of water and a commerci-
ally available descaling agent. Read the instructions given on the descaling agent
packaging for the correct mixing ratio.
4.
Place vessel below the spout which can collect whole content of watertank.
5.
Press
Clean
6.
Depending on the instructions for the descaling agent, you can use the
ton to select a temperature of 50°C, 80°C or 100°C.
7.
Start the process with
will be cleaned and descaled.
8.
Following this, pour away the water.
9. Rinse the water tank carefully.
10. Then ll the tank with fresh water (without descaling agent) and start the device so
that the descaling agent is rinsed out of the pipes.
4.3 Storage
If you do not use the device very often, then remove the plug from mains power, clean the
device and drain any residual water out of the device. Replace the device into its original
packaging to protect the electrical components from becoming damp or getting damaged.
68 CASO HW 770 Advanced
-button. The display shows „50" as temperature.
The device dispenses whole content of watertank and
-but-
Clean