CASO DESIGN HW 770 Advanced Manual Del Usuario página 64

DE
"Favourite" button: Press the button for a few seconds to store a pre-set tempera-
14
EN
ture and water quantity in the memory.
NL
Set the desired temperature according to 000 (normal temperature water),
15
40°C, 45°C, 50°C, 55°C, 60°C, 65°C, 70°C, 75°C, 80°C, 85°C, 90°C, 95°C, 100°C.
SV
Set the water volume according to 100ml, 150ml, 200ml, 250ml, 300ml, 350ml,
16
FR
400ml, 000 (continuous water ow)
For setting of water hardness and start of cleaning and descale function
IT 17
(50°C, 80°C, 100°C).
ES
18
"On / O " button: Turns the device on and o .
RU
19 Start and stop the dispense of water.
PT
WARNING
TR

Caution hot steam can escape at device. Risk of burns.
PLEASE NOTE

Please note that the dispensed water (at all temperature settings) is not boiled before.
Therefore, especially when preparing baby food, we recommend rst boiling the
water in a saucepan for at least 3 minutes; cooling it down to room temperature and
then pouring it into the device's water tank.
2.3 Overheating protection & reset
The device is equipped with an overheating protection
facility. If the temperature of the device exceeds the critical
limit the device shuts o further power supply for safety
reasons.
By pressing the reset button (1) the device can be reactivated.
Unplug the device before reset. When the device is only
producing cold water please press reset button. Please use
enclosed reset-key for the reset-button.
2.4 Rating plate
The rating plate with the connection and performance data
can be founded beneath the device.
3 Operation and Handling
This chapter provides you with important information and notes on the operation and
basic settings of the appliance.
WARNING

Do not leave the device unsupervised during operation.
64 CASO HW 770 Advanced
1