Idiomas disponibles
Idiomas disponibles
Connecting the product for the first time to the
PARKSIDE app:
{Add a
tool}
1.
Select
or
PARKSIDE app scans the area for available devices.
The PARKSIDE app indicates if available devices have
been found.
2.
Tap on the product name to select the battery pack
{Done}
3.
Tap
to confirm the connection. The battery
pack
is listed in the
{Your
[
]
selected.
4.
Select the battery pack
[
product can be found in the
battery pack is installed on the product.
NOTE
If the connection status LED
u
continuously:
Connect the product to the battery pack
Press the on/off switch
connection status LED
[
and lights up continuously. The information about the
product is shown in the
Upgrading the firmware can change the features of the
u
PARKSIDE app.
˜ Cleaning and care
m
WARNING!
Always switch the product off, remove the battery
pack
and let the product cool down before
[
]
performing inspection, maintenance and cleaning
work!
˜ Cleaning
Never allow fluids to get into the product.
The product must always be kept clean, dry and free from
oil or grease. Remove debris from it after each use and
before storage.
Regular and proper cleaning will help ensure safe use and
prolong the life of the product.
Clean the product with a dry cloth. Use a soft brush for
areas that are hard to reach.
In particular clean the air vents after every use with a cloth
and soft brush.
The vents must always be clear.
NOTE
Do not use chemical, alkaline, abrasive or other
u
aggressive detergents or disinfectants to clean this
product as they might be harmful to its surfaces.
36 GB/IE
{Your
tools}
on the
tab. The
[
tools}
tab and can be
. The information about the
]
{Your
tools}
tab, if the
does not light up
[
]
.
[
]
for 5 seconds. The
6 ]
[
blinks for a few seconds
]
{Your
tools}
tab.
˜ Maintenance
Before and after each use, check the product and
accessories (e.g. accessory tools) for wear and damage.
If required, exchange them for new ones as described in
this instruction manual. Observe the technical requirements
(see "Technical data").
.
]
˜ Repair
This product does not contain any parts that can be
repaired by the user. Contact an authorised service centre
or a similarly qualified person to have it checked and
repaired.
˜ Storage
Push the rotation direction switch
to lock the on/off switch
Clean the product as described above.
Store the product and its accessories in a dark, dry, frost-
free, well-ventilated place.
Always store the product in a place that is inaccessible
to children. The ideal long term storage (longer than
3 months) temperature is between +20 and +26 °C.
Guide the drill bit into the bit holder
Store the product in its carrying case
Battery pack advice
Only store the battery pack
battery pack should be charged to 40 to 60 % (red and
orange LED in the charge indicator
storing for extended periods.
Check the battery pack
when storing for extended periods. Recharge as necessary.
˜ Transportation
Push the rotation direction switch
to lock the on/off switch
Transport the product in its carrying case
Protect the product from any heavy impact or strong
vibrations which may occur during transportation in
vehicles.
Secure the product to prevent it from slipping or falling
over.
˜ Disposal
Before passing on, disposing of or returning the product to
the manufacturer, make sure that all data has been deleted
from the product and the cloud.
To do this, refer to the chapter:
"Additional functions", menu point:
{Disconnect and wipe
to the centre position
[
5 ]
.
[
6 ]
.
[
8 ]
.
[
]
partially charged. The
[
]
light up) before
[
]
charge about every 3 months
[
]
to the centre position
5 ]
[
.
[
6 ]
.
[
]
data}
