Idiomas disponibles
Idiomas disponibles
Suitable battery packs and chargers
Battery pack:
X 20 V Team
Charger:
X 20 V Team
NOTE
Disconnect the product from the mains supply when you
u
are away from home. This is to prevent unintentionally
switching the product on.
You can operate the product via your home Wi-Fi network
o
or manually without a Wi-Fi network.
The PARKSIDE app is required to control and set up the
o
product via your home Wi-Fi network.
The PARKSIDE app supports the operating systems
o
iOS 9.0, Android 5.0 or higher.
˜ Attaching/removing the battery
pack
m
CAUTION! RISK OF INJURY!
Always lock the on/off switch
u
starting by moving the rotation direction switch
the centre position (Lock) before attaching/removing
the battery pack
.
[
]
Removing the battery pack: Press the battery pack
release button
. Remove the battery pack
[
]
Attaching the battery pack: Align the battery
pack
to the handle and slide it into it. Ensure it clicks
[
]
noticeably in place.
The battery pack can only be inserted into the product in
one direction.
˜ Checking the battery pack charging
level
(Fig. B)
Check battery pack charge level: Press the
button
. The charging level LEDs
[
]
LED
[
]
Red/orange/green
Red/orange
Red
to avoid accidental
6 ]
[
into
5 ]
[
(Fig. D).
[
]
light up:
[
]
Charging level
Maximum
Medium
Low
˜ Charging the battery pack
(Fig. C)
NOTE
The battery pack
may be charged at any time
u
[
]
without reducing the life.
Interrupting the charging process does not damage the
u
battery pack
.
[
]
Charge the battery pack
medium or low charging level.
The charging control LEDs (green
the status of the charger
LED
Red LED lights up
Green LED lights up
Green and red LED flashing
Red LED flashing
Green LED lights up (without
battery pack)
Insert the battery pack
[
Connect the power cord with power plug
charger
to the socket.
[
]
When the battery pack
[
battery pack from the charger
power plug
of the charger from the socket.
[
]
˜ Attaching/removing the accessory
tool
m
CAUTION! RISK OF INJURY!
Accessory tools can be sharp and may become hot
during use. Always wear protective gloves when
handling accessory tools!
m
WARNING!
Always switch the product off, remove the battery
pack
and let the product cool down before
[
]
making any adjustments!
m
CAUTION! RISK OF INJURY!
Keep your hands away from the accessory tool when
u
the product is in operation.
After the product has been switched off, the accessory
u
tool continues moving for some time. Do not touch the
accessory tool and do not attempt to brake it.
before operation when it is at
[
]
and red
) indicate
[
]
[
]
and the battery pack
:
[
]
[
]
Status
Battery pack charges
Battery pack fully charged
Battery pack defective
Battery pack too cold or too
warm
Charger ready
into the charger
.
]
[
]
of the
[
]
is fully charged: Remove the
]
. Then disconnect the
[
]
GB/IE
33
