Idiomas disponibles
Idiomas disponibles
en
C. Using a manual program
1
3
5
7
9
24
1. Once the cooking program is
selected,
the
corresponding
indicator light becomes solidly lit.
2. A default temperature flashes.
3. Press the – and + buttons to
modify the temperature, if
required.
2
4. Press the OK button to confirm.
5. A predefined cooking time
flashes.
6. Press the – and + buttons to
modify the time, if required.
7. Press the Start button to confirm
and start cooking, and the time
display will stop flashing.
4
8. Cooking has started. The graphic
on the screen's left indicates that
a cooking cycle is underway and
that the appliance is heating. The
time counts down by the minute,
and then by the second during
the last minute.
9. At any time, if you need to adjust
6
the time and/or temperature,
press the Back button or the
– and + buttons.
10. Press the OK button to confirm.
Note: Each subsequent time the
appliance is used, the time and
temperature displayed default to the
8
previous time and temperature used.
10
D. Ending a program
(automatic or manual)
1
2
1. The time reaches 000 and the product sounds an alert to signal the end of cooking.
2. Press OK once to stop the alert. The display 000 flashes.
3. You must use hand protection (oven gloves) to prevent burns when handling hot moulds and
accessories.
Caution: It is important to open the appliance and to quickly remove the cakes so that they do
not continue to cook.
E. Extending a cooking cycle
1
3
3
(automatic or manual)
1. At the end of a program, if the
cake is undercooked, you can add
some cooking time by directly
pressing the – and + buttons.
Close the cover again.
2. Once the additional time has
been entered, press Start to
continue cooking.
2
3. The time display stops flashing
and
the
minute-by-minute
countdown
starts.
continues. The graphic on the
screen's left indicates that a
cooking cycle is underway and
that the appliance is heating.
en
Cooking
25
