Tabla de contenido
Idiomas disponibles
Idiomas disponibles
IMPORTANT." The display screen on the dispenser control panel
will turn off automatically
and enter "sleep" mode when the
control buttons and dispenser paddles have not been used for
2 minutes or more. Press any control button to reactivate the
display screen. The home screen will appear as shown.
View Temperature
Set Points
1. Press and hold TEMP for 3 seconds to activate
Temperature
mode.
NOTE. To view temperature
in degrees Celsius, press the
ACCENT LIGHT button, under Units, when adjust mode is
activated.
To return the display setting to Fahrenheit, press
the ACCENT LIGHT button again.
When Temperature mode is activated,
press TEMP to toggle
between Fridge and Freezer. The display will show the
temperature
set point of the selected compartment,
and
temperature
adjusting information
will appear on the
display screen.
Recommended
Refrigerator Temperature
Viewing and Adjusting Temperature Set Points
For your convenience, your refrigerator
and freezer controls are
preset at the factory.
When you first install your refrigerator,
make sure that the
controls are still set to the recommended
set points. The factory
recommended
set points are 37°F (3°C) for the refrigerator
and
0°F (-18°C) for the freezer.
IMPORTANT:
•
Wait 24 hours before you put food into the refrigerator.
If
you add food before the refrigerator
has cooled completely,
your food may spoil.
NOTE" Adjusting the set points to a colder than
recommended
setting will not cool the compartments
any
faster.
If the temperature
is too warm or too cold in the refrigerator
or freezer, first check the air vents to be sure they are not
blocked
before adjusting the controls.
The recommended
settings should be correct for normal
household use. The controls are set correctly
when milk or
juice is as cold as you like and when ice cream is firm.
NOTE. Areas such as a garage, basement or porch, may
have higher humidity or extreme temperatures.
You may
need to adjust the temperature
away from the
recommended
settings to accommodate
for these
conditions.
•
Wait at least 24 hours between adjustments.
Recheck the
temperatures
before other adjustments are made.
Recommended
Freezer Temperature
Adjust Temperature
Set Points
Refrigerator
set point range: 33°F to 45°F (0°C to 7°C).
Freezer set point range: -5°F to 5°F (-21°C to -15°C).
1. When Temperature mode is activated,
press TEMPERATURE
to select the Refrigerator
zone. The display will show the
temperature
set point of the selected compartment,
as
shown.
2.
3.
Press LOCI( to raise the set point, or press SETTINGS to
lower the set point.
When you have finished viewing (and adjusting if desired)
the refrigerator
set point, press TEMP, under Select Zone, to
change the display to show the freezer set point. When the
zone has been changed, "FREEZER" appears on the display
screen.
4.
Press the LOCI( button to raise the set point, or press the
SETTINGS button to lower the set point.
19
Capítulos
Tabla de contenido
