Appliance Use; Temperature Control - Kenmore 111.21202 Manual De Uso

Appliance Use

Key Components
1
1
4
1
3
1. Wire shelf
2. Door bin
3. Wire basket drawer

4. Temperature control

5. LED interior light
• The interior temperature of this appliance
can be set so that the entire unit can be
used as either a Freezer or a Refrigerator.
• To turn the appliance on, plug the power
cord into a properly grounded 3 prong
electrical outlet. When the door is opened
the interior light will be on and the
temperature control will illuminate.
• For safe food storage, after plugging in
allow two hours if used as a refrigerator
and four hours if used as a freezer for the
appliance to cool down completely to the
set temperature. The compressor will run
continuously for the first several hours.
• Foods that are already frozen may be
placed in the freezer after the first few
hours of operation. Unfrozen foods should
NOT be loaded into the freezer until the
freezer has operated for four hours.
• When loading the freezer, freeze only
three pounds of fresh food per cubic foot
of freezer space at one time. Distribute
packages to be frozen evenly throughout
the freezer.
Temperature Control
5
2
2
2
2
The temperature control is located midway
down on the right inner cabinet wall. It is an
electronic control with LED indicator lights.
Select Key
The control panel must be unlocked for any
adjustments to be made. Press and hold the
Select key for three seconds to unlock the
control panel.
To switch the temperature to Coldest, Colder
or Cold, press and release the Select key. The
LED will light next to the chosen setting. After
15 seconds the control will lock in the
selection.
To switch the unit between use as a Freezer
or Refrigerator, press and hold the Select key
for three seconds. The LED will be lit when in
Freezer mode and unlit when in Refrigerator
mode. After 15 seconds the control will lock in
the selection.
After making an adjustment, allow several
hours for the internal temperature to stabilize
at the new setting.
6