Idiomas disponibles
Idiomas disponibles
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can cause severe injury within a fraction of a sec-
ond.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application. The correct pow-
er tool will do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such precautionary measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools and attachments. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool's operation. If dam-
aged, have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use electric tools, insertion tools, etc. according
to these instructions. Take into account the
working conditions and the work to be per-
formed. Use of the power tool for operations differ-
ent from those intended could result in a hazardous
situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe han-
dling and control of the tool in unexpected situa-
tions.
5) Service
a) Only have your power tool repaired by qualified
specialists and only with original spare parts.
This will ensure that the safety of the power tool is
maintained.
26 | GB
5.1
Safety instructions for
lawnmowers
• Never allow children or other persons who are unfa-
miliar with the usage instructions to use the lawn-
mower. Contact your local governmental agency for
information regarding minimum age requirements
for operating the lawnmower.
• Never mow while people, especially children or ani-
mals are nearby. Always keep in mind that the oper-
ator is responsible for accidents involving other per-
sons and/or their property.
• Only mow when visibility is good. It is necessary to
keep third parties away.
• If you give the device to any other person, give
them this operating manual as well.
• Always wear sturdy, non-slip footwear and long
trousers when mowing. Never mow barefoot or in
sandals.
• Check the terrain on which the machine will be used
and remove all objects that could be caught up and
violently flung out of the chute (like stones, toys,
sticks and wires etc.).
• Switch off the motor, wait for it to stop, remove the
battery and pull out the safety key if
– You are leaving the device.
– You are removing blockages or obstructions.
– The product has been in contact with foreign ob-
jects.
– Malfunctions and unusual vibrations occur on
the device.
ATTENTION
Danger of flying stones!
Never drive over gravel with the motor running.
• Prior to use. always perform a visual inspection to
check whether the blade and fastening bolts are
worn out or damaged. To prevent an imbalance,
worn out or damaged blades and bolts may only be
replaced in sets.
5.2
Handling
• Make sure that all nuts, bolts and screws are se-
curely tightened so that the product is kept in a safe
working condition.
• Regularly check the catch basket for signs of wear
and loss of functionality.
• For safety reasons, replace worn or damaged parts.
• Only mow in daylight or with good artificial lighting.
• Avoid using the product on wet grass as far as pos-
sible.
• Do not use the product in a thunderstorm - Danger
of lightning strike!
• Always maintain good footing on inclines.
www.scheppach.com
