Idiomas disponibles
Idiomas disponibles
USING THE CONTROL PANEL
8 /
Setting water treatment time (in hours)
Setting the correct water treatment time (or chlorine production time) is extremely important to
achieve adequate disinfectant levels and avoid over-chlorination.
The settings given below are for reference only; you can adjust your settings depending on your
personal experience. Please note that filtration time must always be longer than water treatment
time :
< C8.
C9
Regularly test (weekly) free chlorine levels (following the instructions on page 9).
Normal time =
C9
Volume \ Water T°
5 m
to 10 m
3
3
10 m
to 15 m
3
3
15 m
to 20 m
3
3
20 m
to 25 m
3
3
During occasional periods of high-demand (high T°, intensive use, etc.)
BOOST time =
CA
Normal time =
CA
Volume \ Water T°
5 m
to 10 m
3
3
10 m
to 15 m
3
3
15 m
to 20 m
3
3
20 m
to 25 m
3
3
Reverse polarity time =
Reversing polarity allows the cell to be "cleaned"; more specifically this function prevents calcium de-
posits on the plates and scale build-up in the cell. By default, the reverse polarity time is to set to 4h.
However, for soft or very soft water, this time can be extended to 6 or 8h.
Water hardness
Hard to normal
Soft
Very soft
This can be done in two ways: either using the control panel (see previous page: "Adjusting parame-
ters using the control panel") or through the app (see chapter 9).
Off-season
Spring
10°C ~ 20°C
20°C ~ 25°C
= 1
= 2
C9
C9
= 2
= 4
C9
C9
= 3
= 6
C9
C9
= 4
= 8
C9
C9
Frequent use
BOOST
= 5
CA
= 10
CA
= 15
CA
= 20
CA
CC
Total hardness (TH) of water
TH > 150 ppm
8 < TH < 150 ppm
TH < 70 ppm
Peak season
Summer
25°C ~ 28°C
28°C ~ 30°C
= 3
C9
C9
= 6
C9
C9
= 9
= 12
C9
C9
= 12
= 16
C9
C9
Reverse polarity time
= 4h
CC
= 6h
CC
= 8h
CC
Comfort
30°C et +
= 4
= 5
C9
= 8
= 10
C9
= 15
C9
= 20
C9
EN
| 21
