Idiomas disponibles
Idiomas disponibles
OPERATING LIMITS
1 /
Heat pump
As with any other heat pump, the one installed in the POOLICAN system may only be used when the
outside temperature is between -7°C and 43°C; however, we recommend winterizing your pool if
the water temperature drops below 10°C. Thanks to the Full Inverter system, POOLICAN automati-
cally adjusts power depending on its settings and the external environment. Thus, when increasing
water temperature (this phase may last up to a week after installation), POOLICAN will use all avai-
lable power; and once the target temperature has been reached, POOLICAN will reduce its power
consumption. Please note that as with any heat pump, and in order to limit power consumption, the
pool should be covered when not in use, or an automatic pool cover installed, in order to limit heat
losses due to evaporation. If this recommendation is not followed, it may affect power consumption
and the target temperature.
Please note: some pool manufacturers recommend a maximum water temperature for their pools.
For example, if using a liner pool or a one-piece pool, do not exceed the maximum temperature
recommended by the manufacturer.
For more information, contact your pool maintenance technician.
N.B.: Above 32°C, bacteria multiply more quickly.
2 /
Circulation / Filtration
As with any pool filtration equipment, it's extremely important that the time of circulation/filtration
time is sufficiently long:
-
To have well-filtered water,
-
To reach and properly maintain water temperature,
-
To obtain satisfactory water filtration levels.
As a general rule, the minimum theoretical filtration times are given by the following simplified formula:
Please note: above 25°C, extra filtration time is required (see page 20).
Consider winterizing your pool when temperatures drop below 15°C (see Chapter 10.4, page 29).
Your filter must be cleaned regularly (minimum of once per week); a CF warning will be displayed
every 150h (adjustable from 130h to 200h).
To clean the filter, shut down the POOLICAN by setting it to OFF, and once stopped (after a period
of around 3 minutes), open the cover to remove and clean the filter using a garden hose (make sure
to clean well between each fold). Valves should be closed if your POOLICAN is installed below the
water level (above ground pool).
Filtration time (in hours) =
Water T°
2
EN
| 7
