poolstar Poolican Manual De Instalación Y De Uso página 120

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
In the event of excess salinity (> 4.5 g/l or 45 kg/m
pool may be necessary in order to add fresh water without salt.
Furthermore, the correct stabiliser level must be between 20ppm and
50ppm. In the event it exceeds these values, partial draining of the pool may
be necessary in order to add fresh water without stabiliser.
Quick reference table for adding salt according to the salinity measured prior to installation:
Volume in m
3
10
15
25
Volume in thou-
sands of gallons
2.5
4
6.5
3 /
Required stabiliser levels
Hypochlorite remains effective if the stabiliser level is between 20 and 50 ppm.
A lack of stabiliser reduces disinfection efficiency due to the hypochlorite reverting back to salt too
quickly. Conversely, stabiliser levels which are too high effectively nullify its capacity to disinfect; the
stabiliser locks up the hypochlorite and renders it useless.
Thus, in order to reach this level of stabiliser, add a little stabiliser but be careful not to add too much
(refer to the instructions which come with the stabiliser sold separately): target 20 ppm < stabiliser
level < 50 ppm
If you're unsure of the volume of your pool (m
-
Rectangular pool: Length x Width x Average Depth
-
Round pool: Diameter x Diameter x Average Depth x 0.80
-
Oval pool: Length x Width x Average Depth x 0.90
Before adding stabiliser, test your water to measure its current concentration, then add the corres-
ponding quantities according the instructions provided.
Please note that stabiliser is not lost through evaporation. In the event of adding excess quantities,
partial draining of the pool may be necessary.
16 |
EN
BEFORE USE
Salinity before adding salt (PPM)
0
500
Amount of salt required (kg)
30
25
45
38
75
62
0
500
65
55
100
84
165
137
1000
1500
20
15
30
23
50
38
Salinity before adding salt (PPM)
1000
1500
Amount of salt required (pounds)
45
33
65
50
110
84
), you can calculate it using the following equations :
3
), partial emptying of the
3
2000
2500
10
5
15
8
25
13
2000
2500
22
11
33
17
55
28
3000
0
0
0
3000
0
0
0
loading