poolstar Poolican Manual De Instalación Y De Uso página 110

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
POOLICAN is the all-in-one system designed for pools which fulfils all of the main functions required
by your pool:
-
CIRCULATION / FILTRATION
-
HEATING
-
WATER TREATMENT
The first step is setting your desired temperature, and from there adjusting the settings of the other
elements in order to reach this value according to the size of your pool.
The heat pump recovers energy from the surrounding air and transfers this energy to your pool
yielding up to 5 times the power consumed. Despite its compact size, the POOLICAN can heat up to
25m
depending on its geographic location. Please note: for better efficiency and in order to save
3
energy, we strongly recommended covering your pool immediately after use.
Filtration is done using a cartridge filter with a large surface area in combination with a low flow rate
(3.5m
/h) and low power (300W) circulation pump. This allows water to be filtered throughout the
3
day and optimises water circulation in the heat pump for improved temperature regulation.
Thus, filtration time must be sufficiently long in order to achieve high-quality filtration (see paragraph
titled "Setting filtration time" on page 20).
Salt chlorination of a pool works by using salt electrolysis to sanitise the water; this electrochemical
process converts the salt present in the water into a disinfec-
tant (hypochlorite ions).
Once this process is complete, these hypochlorite ions re-
vert back to salt after coming into contact with organic ma-
terial (bacteria, cells), or under the effect of UV rays or other
sources of light, and the cycle begins over again.
In order to maintain good levels of disinfectant in the water,
the following factors must be respected :
Appropriate concentration of salt in the water:
3 g/l (or 3 kg/m
Correct stabiliser level (between 20ppm and 50ppm),
Sufficient filtration time,
Good water balance with a pH between 7.0 and 7.6,
Regular cleaning of your pool to remove any plant debris,
In case of frequent use, consider using the boost function.
In the event of the water turning green, salt chlorination alone will not be sufficient,
and supplementing with chlorine tablets may be required.
6 |
EN
HOW IT WORKS
),
3
loading