DeLonghi ELETTA EXPLORE ECAM45X8Y Instrucciones De Uso página 9

Ocultar thumbs Ver también para ELETTA EXPLORE ECAM45X8Y:
Idiomas disponibles

Idiomas disponibles

7. Press "OK" to fill the water circuit. The appliance delivers
water from the hot water spout (fig. 7);
8. At the end of delivery, the appliance proceeds to warm up
by performing a rinse cycle, delivering hot water from the
coffee spouts (fig. 8).
When at temperature, the appliance proposes a tutorial on how
to use the machine.
Please note:
The first time you use the appliance, you need to make
4-5 cappuccinos before the results in the cup will be
satisfactory.
The first time you use the machine, the water circuit is
empty and the appliance could be very noisy. The noise
becomes less as the circuit fills.
5. TURNING THE APPLIANCE ON U
Please note:
Each time the appliance is turned on, it performs an auto-
matic preheat and rinse cycle which cannot be interrupted.
The appliance is not ready for use until the cycle has been
completed.
1. To turn the appliance on, press the
9): the appliance comes on.
6
8
button (A9) (fig.
7
2. When at temperature, the appliance performs a rinse cycle
delivering hot water from the coffee spouts(A7); as well as
heating the boiler, this also heats the internal circuits by
circulating hot water.
6. TURNING THE APPLIANCE OFF
Whenever the coffee machine is turned off after being used to
make coffee, it performs an automatic rinse cycle.
1. To turn the appliance off, press the
9).
2. If envisaged, the appliance rinses the coffee spouts (A7)
with hot water, then goes off (stand-by).
Please note:
If you will not be using the appliance for some time, turn off,
then unplug from the mains socket.
Important!
Never unplug while the appliance is on.
7. MENU SETTINGS U
7.1
Rinsing
Use this function to deliver hot water from the coffee spouts
(A7) (and, if inserted, the hot water spout (D6)), to clean and
heat the appliance's internal circuit.
Place a container with a minimum capacity of 3.38 fl oz/100 ml
under the spouts (fig. 6).
To enable the function, proceed as follows:
1. Press the settings menu (C3);
2. Display "Rinsing";
3. Press "OK" to start delivery. After a few seconds, hot water
is delivered to clean and heat the appliance's internal cir-
cuit (fig. 7- 8);
4. To stop rinsing, press "Stop" or wait for rinsing to stop
automatically.
Please note:
If the appliance is not used for more than 3-4 days, when
you turn it on again, we strongly recommend performing
2-3 rinses before use;
After cleaning, it is normal for the grounds container (A10)
to contain water.
9
9
button (A9) (fig.
loading

Este manual también es adecuado para:

Eletta explore ecam45086s