FR
Your 765 Optimum is fitted with two bottle mounts,
one on the seat tube and one on the down tube.
Remove the four M5 screws using a 4mm Allen key.
Install the bottle holders (please see the relevant
product manual), then grease and tighten the
screws to a torque of 3Nm.
Warning : Use only the original screws
!
provided.
Your bottom bracket is based on the T47 M47
standard, which is 85.5mm wide.
Always
follow
the
instructions.
Our fork legs feature the standard LOOK conical-
head thru axle to eliminate any axial and radial play
(tightening torque 11Nm).
The 765 is designed to accommodate tire widths up
to 700x34C.
It is important to regularly check and service your
bicycle to ensure your safety and optimize the
lifespan of your product. A poorly maintained bicycle
or components may break or fail and potentially
cause an accident, serious injury or paralysis.
HYDRATATION
BOTTOM BRACKET
WHEEL ASSEMBLY
manufacturer's
assembly
MAINTENANCE
IMPORTANT : We strongly advise you to contact
your nearest LOOK retailer for more information
on compatible bottom brackets.
For
more
information
requirements, please refer to our website
www.lookcycle.com, WARRANTY POLICY >
IMPORTANT INFORMATION.
Fig.22
on
maintenance
21
