Idiomas disponibles
Idiomas disponibles
Programming (continued)
Determine and Set Operating Mode
Select the operating mode for your application from the menu in the Wall Controller.
WIRING
DEVICE
TYPE
B2 -
Front panel
Momentary
buttons
contact to
(membrane)
open,close
and 3-Button
and stop, plus
Wall
wiring for
Controller
sensing device
to reverse
and auxiliary
devices to
open and
close with
open override.
Programmable
Mid-Stops
available with
this wiring
type. Close Mid
Stop available
but not shown
in table.
Compatible
with 3-Button
Station,
1-Button
Station, 1
and 3-Button
Remote
Control.
3-Button
Monitored
Remote
Entrapment
Control
Protection
Programmed
(LMEP) Device
as OPEN/
required.
CLOSE/STOP
Single Button
Remote
Control
Programmed
as SBC
ACTION
STATE
Operator at OPEN limit
Operator at CLOSE limit
OPEN button
Door opening
is pressed
Door closing
momentarily
Door at Open Mid-Stop
Door stopped during open or close cycle Door opens to the OPEN limit or Mid-Stop
Operator at OPEN limit
Operator at CLOSE limit
CLOSE
Door opening
button is
pressed
Door closing
momentarily
Door at Open Mid-Stop
Door stopped during open or close cycle Door closes to the CLOSE limit
Operator at OPEN limit
Operator at CLOSE limit
STOP button
Door opening
is pressed
Door closing
momentarily
Door at Open Mid-Stop
Door stopped during open or close cycle No change in state
Operator at OPEN limit
Operator at CLOSE limit
OPEN button
Door opening
is held
(constant
Door closing
pressure)
Door at Open Mid-Stop
Door stopped during open or close cycle
Operator at OPEN limit
CLOSE
Operator at CLOSE limit
button
Door opening
is held
Door closing
(constant
Door at Open Mid-Stop
pressure)
Door stopped during open or close cycle Door closes to the CLOSE limit
Operator at OPEN limit
Operator at CLOSE limit
OPEN button
Door opening
is pressed
Door closing
momentarily
Door at Open Mid-Stop
Door stopped during open or close cycle Door opens to the OPEN limit
Operator at OPEN limit
Operator at CLOSE limit
CLOSE
Door opening
button is
pressed
Door closing
momentarily
Door at Open Mid-Stop
Door stopped during open or close cycle Door closes to the CLOSE limit
Operator at OPEN limit
Operator at CLOSE limit
STOP button
Door opening
is pressed
Door closing
momentarily
Door at Open Mid-Stop
Door stopped during open or close cycle No change in state
Operator at OPEN limit
Operator at CLOSE limit
Door opening
Button is
Door closing
pressed
Door at Open Mid-Stop
Door stopped during the open cycle
Door stopped during the close cycle
RESPONSE
No change in state
Door opens to the OPEN limit or Mid-Stop
No change in state
Door will auto reverse to OPEN limit or Mid-Stop
Door opens to the OPEN limit
Door closes to the CLOSE limit
No change in state
No change in state
No change in state
Door closes to the CLOSE limit
No change in state
No change in state
Door stops
Door stops
No change in state
No change in state
Door opens to the OPEN limit (bypasses Mid-
Stop)
No change in state (bypasses Mid-Stop)
Door will auto reverse to OPEN limit (bypasses
Mid-Stop)
Door opens to the OPEN limit
Door opens to the OPEN limit (bypasses Mid-
Stop)
Door closes to the CLOSE limit
No change in state
No change in state
No change in state
Door closes to the CLOSE limit
No change in state
Door opens to closest OPEN limit or Mid-Stop
No change in state
Door will auto reverse to OPEN limit or Mid-Stop
Door opens to the OPEN limit
Door closes to the CLOSE limit
No change in state
No change in state
No change in state
Door closes to the CLOSE limit
No change in state
No change in state
Door stops
Door stops
No change in state
Door closes to the CLOSE limit
Door opens to the OPEN limit or Mid-Stop
Door stops
Door will auto reverse to OPEN limit or Mid-Stop
Door opens to the OPEN limit
Door closes to the CLOSE limit
Door opens to the OPEN limit or Mid-Stop
35
